Phase behavior of sucrose monoalkanoate in a water-long-chain alcohol system

Phase diagram of a water/sucrose monododecanoate (SE)/hexanol system was determined at 30°C. Aqueous micellar, reverse micellar, normal hexagonal liquid crystalline, and lamellar liquid crystalline phases appear in the phase diagram. The change in interlayer spacing and interfacial section area of surfactant in the liquid crystalline phases was investigated by small-angle x-ray scattering. Upon addition of water, the section area and the radius of cylindrical aggregates are almost constant in a hexagonal liquid crystal, whereas the distance between each cylinder is separated on the water-SE axis. The interlayer spacing slightly decreases or is almost unchanged on the surfactant-hexanol axis, because alcohol molecules penetrate into the palisade of bilayers. Although the average section area decreases with increasing alcohol content, each section area of SE and alcohol molecules are kept constant. Since the interfacial section area of alcohol is less than the section area of hydrocarbon chain, the phase transition from lamellar liquid crystal to reverse micelle occurs in an alcohol-rich region.     

Optical oxygen sensor based on fluorescence change of pyrene-1-butyric acid chemisorption film on an anodic oxidation aluminium plate

An optical oxygen-sensing material based on the fluorescence intensity changes of pyrene-1-butyric acid (PBA) chemisorption film has been developed and characterised. The fluorescence intensity of PBA film decreased with increase of oxygen concentration. The I₀/I₁₀₀ value of PBA film is estimated to be 6.14±0.15 and large Stern-Volmer constant (K_SV=0.028±0.13 Torr⁻¹) is obtained. After irradiation for 24 h with 150 W tungsten lamp, little changes of oxygen-sensing properties were observed. These results indicate that PBA film is highly oxygen-sensitive and photostability device. The response times of the PBA chemisorption film were 10.0 s for switching from argon to oxygen, and 53.0 s for switching from oxygen to argon. Moreover, the optical sensor based on the PBA chemisorption film was applied to the measurement of oxygen concentration in aqueous solution.     

Asymmetric selective polymerization of racemic methacrylates with the cyclohexylmagnesium bromide-(−)-sparteine system

Asymmetric selective (or stereoelective) polymerization of various racemic methacrylates with cyclohexylmagnesium bromide (c-HexMgBr)-(-)sparteine (1/1.2) catalyst was studied in toluene at ?78°C. The methacrylates of α-ethylbenzyl (EBMA), α-isopropylbenzyl (i-PBMA), α-tert-butylbenzyl (t-BBMA), sec-butyl (s-BuMA), 1-methylallyl (1-MAMA), 2,3-epoxypropyl (2,3-EPMA), 2-phenylpropyl (2-PPMA), and menthyl (MentMA) alcohols were used as racemic monomers. In the polymerization of EBMA and i-PBMA (S) enantiomers were consumed preferentially and the optical purity of initially polymerized i-PBMA was as high as 97%. Optically pure (R) monomers were recovered at about 60% conversion for i-PBMA and 80% for EBMA. In t-BBMA, however, the (R) monomer was consumed preferentially over the (S) isomer. In the polymerization of s-BuMA and 1-MAMA (S) monomers were consumed in excess and the optical purity of the polymers formed in the early stage was about 30%. In 2,3-EPMA and 2-PPMA, which have asymmetric centers at the β position from the ester oxygen, (R) antipodes were more reactive. MentMA did not polymerize at ?78°C. Enantiomer selectivity ratios r_S and r_R were determined in the polymerization of EBMA, i-PBMA, and 1-MAMA. All polymers except poly(t-BBMA) were highly isotactic, but the tacticity of poly(t-BBMA) could not be estimated. Circular dichroism spectra of optically active polymers of α-substituted benzyl esters were measured.     

Synthesis of functionalized hydroquinones via [Cp*RuCl2]2-catalyzed cocyclization of alkynes, alpha,beta-unsaturated carbonyl compounds, and carbon monoxide

[reaction: see text] Catalytic [2 + 2 + 1 + 1] cocyclization reaction of an alkyne, an alkene, and two molecules of carbon monoxide, leading to functionalized hydroquinones, was studied. Using [Cp*RuCl2]2 as a catalyst, we found that a variety of electron-deficient alkenes, such as alpha,beta-unsaturated ketones, esters, amides, and nitriles, can be employed as an alkene coupling partner to give the corresponding hydroquinones.     

Arg-72 of pharaonis phoborhodopsin (sensory rhodopsin II) is important for the maintenance of the protein structure in the solubilized states

In bacteriorhodopsin (bR), Arg-82bR has been proven to be a very important residue for functional role of this light-driven proton pump. The arginine residue at this position is a super-conserved residue among archaeal rhodopsins. pharaonis phoborhodopsin (ppR; or called as "pharaonis sensory rhodopsin II") has its absorption maximum at 498 nm and acts as a sensor in the membrane of Natronobacterium pharaonis, mediating the negative phototaxis from the light of wavelength shorter than 520 nm. To investigate the role of the arginine residue (Arg-72ppR) of ppR corresponding to Arg-82bR, mutants whose Arg-72ppR was replaced by alanine (R72A), lysine (R72K), glutamine (R72Q) and serine (R72S) were prepared. These mutants were unstable in low concentrations of NaCl and lost their color gradually when the proteins were solubilized with 0.1% n-dodecyl-beta-D-maltoside. The order of instability was R72S > R72A > R72K > R72Q > the wild type. The rates of denaturation were reduced in a solution of high concentrations of monovalent anions.     

Stereospecific polymerization of isobutyl vinyl ether. III. Polymerization with VCl3 • LiCl

The polymerization of isobutyl vinyl ether by vanadium trichloride in n-heptane was studied. VCl₃ ? LiCl was prepared by the reduction of VCl₄ with stoichiometric amounts of BuLi. This type of catalyst induces stereospecific polymerization of isobutyl vinyl ether without the action of trialkyl aluminum to an isotactic polymer when a rise in temperature during the polymerization was depressed by cooling. It is suggested that the cause of the stereospecific polymerization might be due to the catalyst structure in which LiCl coexists with VCl₃, namely, VCl₃ ? LiCl or VCl₂ ? 2LiCl as a solid solution in the crystalline lattice, since VCl₃ prepared by thermal decomposition of VCl₄ and a commercial VCl₃ did not produce the crystalline polymer and soluble catalysts such as VCl₄ in heptane and VCl₃ ? LiCl in ether solution did not yield the stereospecific polymer. It was found that some additives, such as tetrahydrofuran or ethylene glycol diphenyl ether, to the catalyst increased the stereospecific polymerization activity of the catalysts. Influence of the polymerization conditions such as temperature, time, monomer and catalyst concentrations, and the kind of solvent on the formed polymer was also examined.     

Nmr spectroscopic studies on the tautomerism in tenuazonic acid analogs

Nmr spectra of structural analogs of tenuazonic acid such as 3-acetyltetramic acid, 3-acetyltetronic acid, 3-acetylthiotetronic acid and others were investigated for elucidation of the tautomeric structures. These compounds have completely enolized β,β′-triketone systems, and the position of the nmr signals for the enolic proton shows that the strength of their intramolecular hydrogen-bonding is weaker than those of acyclic β,β′-triketones and six-membered cyclic triketones. The assignment was made for nmr signals split by the difference of the diamagnetic anisotropic effect in each tautomers. The percentages of each of the tautomers were calculated from the intensities of the corresponding nmr signals. The results were confirmed by means of ¹³C-nmr spectroscopy.     

Synthesis and photochemical properties of a photochromic iron(II) complex of hexaarylbiimidazole

The photochromic ligand bis(terpyridyl)hexaarylbiimidazole (bistpy-HABI) and the Fe(II) complex of bistpy-HABI with formula [{Fe(tpy)}2.bistpy-HABI](PF6)4.4H2O were synthesized and characterized. Bistpy-HABI is readily cleaved into a pair of terpyridyltriphenylimidazolyl radicals (tpy-TPI*) on irradiation with UV light. This photochemical reaction is completely reversible, and the light-induced radicals can thermally recombine to form bistpy-HABI in the dark. [{Fe(tpy)}2.bistpy-HABI]4+ is the first example of a transition-metal complex of an HABI derivative and was found to show photochromic reaction in solution. The spin state of the light-induced radical pair in a frozen matrix was investigated by ESR spectroscopy. The triplet state of the light-induced radical pair from [{Fe(tpy)}2.bistpy-HABI]4+, as well as that from bistpy-HABI, was confirmed to be a ground state or nearly degenerated with a singlet state. Kinetic studies on the radical recombination reaction in solution elucidated the decrease in the activation energy by forming the Fe(II) complex. This is the first observation of a decrease in the activation energy of the radical recombination reaction by the formation of a metal-coordinated radical complex. The syntheses, photochemical properties, and spin states of bistpy-HABI and [{Fe(tpy)}2.bistpy-HABI](PF6)4 are discussed.     

Metal-ion-assisted hydrolysis of dipeptides involving a serine residue in a neutral aqueous solution

Dipeptides having a serine residue at the C-terminus, X-Ser, where X is an appropriate amino acid residue, were efficiently hydrolyzed in the presence of ZnCl2 at pH 7.0. The rapid hydrolysis of X-Ser is due to an autocatalysis of the hydroxy group in the serine residue, and is found to be accelerated by a metal ion, in particular by ZnCl2. Roles of the metal ion in the hydrolysis of peptides involving a serine residue, in relation to the recently reported protein cleavages, are discussed.     

Preparation and characterization of polypropylene/mesoporous silica nanocomposites with confined polypropylene

Polypropylene (PP)/Ti-MCM-41 nanocomposites were prepared by isospecific propylene polymerization with Ti-MCM-41/Al(i-C₄H₉)₃ catalyst. The cross polarization/magic angle spinning (CP/MAS) ¹³C NMR spectrum of the composite was similar to that of the conventional isotactic PP, and the decrease in the pore volume of Ti-MCM-41 in the nanocomposites, as measured by N₂ adsorption, was consistent with the value calculated from the weight loss in the thermogravimetric analysis (TGA) curve; both these facts attest to propylene polymerization within the mesopores of Ti-MCM-41. Alkali treatment followed by extraction with o-dichlorobenzene allows us to extract the confined PP out of the Ti-MCM-41 mesopores. Although the PP/Ti-MCM-41 nanocomposites do not exhibit a crystalline melting point, the same PP when extracted from the mesopores showed a clear melting point at 154.7 °C; this indicates that the crystallization of PP confined in mesopores is strongly hindered. For the PP polymerized within the confinement, the molecular weight (M_w) and molecular weight distribution (M_w/M_n) were 84,000 and 4.3, respectively; these values were considerably smaller than those of the PP polymerized concurrently outside the Ti-MCM-41 mesopores (M_w = 200,000–450,000, M_w/M_n = 40–75). Therefore, the confinement also has a marked effect on the molecular weight of the PP. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 3324–3332, 2003